![Projector lamps, TV lamps - [web]](https://www.projector-parts.co.uk/img/logo_uk.png){kind=logo}
Epson EMP-X56: Projector Lamp Replacement Video Tutorial
Have a look at how to replace the lamp with housing in a Epson EMP-X56 projector. The procedure for other Epson models is often quite similar. In this demonstration, the entire lamp with housing is replaced with a new one. If you have purchased a bare bulb without housing, have a look at the video on replacing bulbs in housing.
Subtitle transcription
- Turn off the projector by pressing the Power switch
- Let the projector cool down for at least 30 minutes
- Unplug the projector
- Remove the screws that hold the lamp’s cover
- Take off the lamp’s cover
- Remove the two screws that hold the lamp housing
- Pull out the lamp housing
- Unpack the new lamp
- If you purchased a bare bulb without housing, check out our video: Replacing a bare bulb in projector lamp housing
- Be careful not to touch the bulb with your bare hands
- If necessary, use plastic gloves
- Insert the new lamp and tighten it
- Return and secure the cover back in its position
- Clean or replace the dust filter
- Plug the projector in and switch it on
- Perform a reset of lamp hours: Menu > Reset > Reset Lamp Hours > Clear the cumulative Lamp Hours "0H".
Send the instructions on to your friends
All of our videos
Do you need to order a new Epson projector lamp?
Here are direct links directly to several of the best-selling lamp manufacturers: